SCR vis autoperceuses
In order to process various products, DEC International also offers a range of self-drilling screws. Self-drilling screws, also known as Tek screws, eliminate the need for a pre-drilled hole and allow drilling and fastening to be done in the same motion.
These screws have been produced out of acier au carbone galvanisé. The screw thread continues up to the head. The tail of the screw has been provided with a drill head, so pre-drilling is not necessary.
|
Spécifications
|
|
|---|---|
| matérielle de vis: | acier au carbone galvanisé |
| diamètre du filetage: | 3.5 - 4.8 mm |
| longueur vis-fil: | 9.5 - 50 mm |
|
Spécifications techniques
|
|
|---|---|
Spécification Néerlandaise |
|
Spécification Allemande |
|
Spécification Anglaise |
|
Images de produits
|
|
|---|---|
|
Classements
|
||
|---|---|---|
indisponible |
tête de rondelle carrée
 |
 |
 |
 |
 |
|---|---|---|---|---|
| 3.5 x 9.5 | 2.5 mm | SCR3.5/9.5 | 1000 | 720 |
| 3.5 x 13 | 2.5 mm | SCR3.5/13 | 1000 | 720 |
| 4.2 x 13 | 2.5 mm | SCR4.2/13 | 1000 | 720 |
| 4.2 x 16 | 2.5 mm | SCR4.2/16 | 1000 | 360 |
| 4.2 x 19 | 2.5 mm | SCR4.2/19 | 1000 | 360 |
| 4.2 x 25 | 2.5 mm | SCR4.2/25 | 1000 | 360 |
| 4.2 x 40 | 2.5 mm | SCR4.2/40 | 500 | 360 |
| 4.2 x 50 | 2.5 mm | SCR4.2/50 | 200 | 360 |
| 4.8 x 16 | 4.5 mm | SCR4.8/16 | 1000 | 360 |
| 4.8 x 19 | 4.5 mm | SCR4.8/19 | 1000 | 360 |
| 4.8 x 25 | 4.5 mm | SCR4.8/25 | 1000 | 360 |
tête de rondelle carrée bits de vis
|
|
|
|
|---|---|---|---|
| 3.5 mm | SCR.BIT1 | 1 | 50000 |
| 4.2 - 4.8 mm | SCR.BIT | 1 | 50000 |
tête de rondelle hexagonale DIN 7504 K
|
|
|
|
|
|---|---|---|---|---|
| 4.2 x 13 mm | 2.3 mm | SCRDPM4.2/13 | 1000 | 360 |
| 4.2 x 16 mm | 3.4 mm | SCRDPM4.2/16 | 1000 | 360 |
| 4.2 x 19 mm | 3.4 mm | SCRDPM4.2/19 | 1000 | 360 |
| 4.8 x 16 mm | 3.4 mm | SCRDPM4.8/16 | 1000 | 360 |
| 4.8 x 19 mm | 3.4 mm | SCRDPM4.8/19 | 1000 | 360 |
tête de rondelle hexagonale bits de vis
|
 |
|
|
|
|---|---|---|---|---|
| 4.2 mm | 42/45 mm | SCR.DPM.BIT7 | 1 | 50000 |
| 4.8 mm | 42/45 mm | SCR.DPM.BIT8 | 1 | 50000 |
| 4.2 mm | 65 mm | SCR.DPM.BITLONG7 | 1 | 50000 |
| 4.8 mm | 65 mm | SCR.DPM.BITLONG8 | 1 | 50000 |