PINSA broches d'isolation auto-adhésives
These self adhesive pins are suitable for fastening insulation blankets to square or rectangular air ducts.
The pin has been manufactured out of galvanized steel. It consists of a pin and a base. The base is provided with a synthetic rubber tack coat. Clamps can be delivered with the pins. The clamp is going to be fastened to the PINSA after attaching the installation blanket. In consequence of this the blanket will stay in the correct position.
sécurité
Protective caps are available (PINSACAP). The use of these caps is always recommended where people can be injured by projecting pins.
Each pin will be delivered with a cap and clip. Seperate delivery of caps and clips is also possible.
|
Spécifications
|
|
|---|---|
| matériel broche et base: | acier galvanisé |
| couche adhésive: | caoutchouc synthétique |
| tenue en température: | -40 °C à 80 °C |
valeur maximale: |
100 °C pour une courte période de temps |
| longueur broche: | 19 - 165 mm |
| dimension de base: | 50 x 50 mm |
| nombre par m² | 10 - 12 pieces |
|
Spécifications PINSA CLIP |
|
|---|---|
| matériel: | acier galvanisé |
|
Spécifications PINSA CAP |
|
|---|---|
| matériel: | nylon |
|
Spécifications techniques
|
|
|---|---|
Spécification Néerlandaise |
|
Spécification Allemande |
|
Spécification Anglaise |
|
Images de produits
|
|
|---|---|
|
Classements
|
||
|---|---|---|
indisponible |
 |
 |
 |
 |
|---|---|---|---|
| 19 mm | PINSA019 | 500 | 112 |
| 25 mm | PINSA025 | 500 | 112 |
| 32 mm | PINSA032 | 500 | 96 |
| 42 mm | PINSA042 | 500 | 96 |
| 51 mm | PINSA051 | 500 | 96 |
| 63 mm | PINSA063 | 500 | 96 |
| 76 mm | PINSA076 | 500 | 63 |
| 105 mm | PINSA105 | 500 | 45 |
| 165 mm | PINSA165 | 250 | 45 |
|
|
|
|
|---|---|---|---|
| PINSA clip | PINSACLIP | 1000 | 96 |
| PINSA cap | PINSACAP | 1000 | 96 |